| Tool
plate diameter: |
recommended
800 mm/32" (max. dia. based on inertia load) |
| Dial
plate diameter: |
150
mm/5.91" |
| Direction
of rotation: |
clockwise
- counter clockwise or reciprocating |
| Indexing: |
2,
3, 4, 6, 8, 10, 12, 16, 20, 24, special increments upon request |
| Cycle
frequency: |
Up
to 210 cpm, depending on inertia loading and number of stops |
| Voltage: |
240V/480V/3PH/60Hz
or 120V/240V/1PH/60Hz
with inverter (other voltages upon request). |
| Drive
motor: |
.04-.12
hp |
| Weight: |
55
lbs. |
| Mounting
position: |
Click
for table |
| Indexing
accuracy: |
No.
of indexing 2-12: ± 30“
No. of indexing 16-24: ± 45“ (in angular seconds)
(in angular seconds)
Upon request, increased indexing accuracy)
|
Indexing
accuracy,
radian measure: |
(at
Ø 150 mm)
No. of indexing 2-12: ± 0.011 mm/±.0004"
No. of indexing 16-24: ± 0.016 mm/±.0006" |
max.
flatness
of dial plate: |
(at Ø 150 mm) 0.01 mm/±.0004" |
| max.
run out: |
0.01 mm/±.0004" |
| max.
parallelism of the plate surface to the housing bottom surface: |
(at
Ø 150 mm) 0.03 mm/±.0012"
|
Home
| Contact | About Us
| Site Map 
Download Cad File